<var id="fnfpo"><source id="fnfpo"></source></var>
<rp id="fnfpo"></rp>

<em id="fnfpo"><object id="fnfpo"><input id="fnfpo"></input></object></em>
<em id="fnfpo"><acronym id="fnfpo"></acronym></em>
  • <th id="fnfpo"><track id="fnfpo"></track></th>
  • <progress id="fnfpo"><track id="fnfpo"></track></progress>
  • <tbody id="fnfpo"><pre id="fnfpo"></pre></tbody>

  • x
    x

    Microchip連接電網的太陽能微逆變器220V參考設計

    發布時間:2012-1-13 00:24    發布者:1770309616
    關鍵詞: Microchip , 電網 , 逆變器 , 太陽能
    Microchip公司的連接電網的太陽能微逆變器參考設計(220V)采用dsPIC33FJx6GS系列產品.該16位數字信號控制器包括DSP功能和高性能16位微控制器(MCU)架構,3.0V-3.6V時的性能高達40MIPS.太陽能微逆變器系數的峰值效率高達94%,輸出電流的THD小于5%,功率因素大于0.95,具有最大功率點跟蹤(MPPT),全數字控制,太陽能電池板的電壓從25V到55VDC,MPPT電壓25V-45V,最大DC短路電流10A,廣泛用于連接電網農村家庭太陽能系統.本文介紹了dsPIC33FJx6GS系列主要特性,方框圖,CPU核方框圖,太陽能微逆變器參考設計框圖,電路圖和材料清單與PCB布局圖.

    dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 devices contain extensive Digital Signal Processor (DSP) functionality with a high-performance, 16-bit microcontroller (MCU) architecture.

    dsPIC33FJx6GS系列主要特性:

    Operating Range:
    • Up to 40 MIPS Operation (at 3.0-3.6V):
    - Industrial temperature range (-40℃ to +85℃)
    - Extended temperature range (-40℃ to +125℃)
    High-Performance DSC CPU:
    • Modified Harvard Architecture
    • C Compiler Optimized Instruction Set
    • 16-Bit Wide Data Path
    • 24-Bit Wide Instructions
    Linear Program Memory Addressing up to 4M Instruction Words
    • Linear Data Memory Addressing up to 64 Kbytes
    • 83 Base Instructions: Mostly 1 Word/1 Cycle
    • Two 40-Bit Accumulators with Rounding and Saturation Options
    • Flexible and Powerful Addressing modes:
    - Indirect
    - Modulo
    - Bit-Reversed
    • Software Stack
    • 16 x 16 Fractional/Integer Multiply Operations
    • 32/16 and 16/16 Divide Operations
    • Single-Cycle Multiply and Accumulate:
    - Accumulator write back for DSP operations
    - Dual data fetch
    • Up to ±16-Bit Shifts for up to 40-Bit Data
    Digital I/O:
    • Peripheral Pin Select Functionality
    • Up to 35 Programmable Digital I/O Pins
    • Wake-up/Interrupt-on-Change for up to 30 Pins
    • Output Pins can Drive Voltage from 3.0V to 3.6V
    • Up to 5V Output with Open-Drain Configuration
    • 5V Tolerant Digital Input Pins (except RB5)
    • 16 mA Source/Sink on All PWM pins
    On-Chip Flash and SRAM:
    • Flash Program Memory (up to 16 Kbytes)
    • Data SRAM (up to 2 Kbytes)
    • Boot and General Security for Program Flash
    Peripheral Features:
    • Timer/Counters, up to Three 16-Bit Timers:
    - Can pair up to make one 32-bit timer
    • Input Capture (up to two channels):
    - Capture on up, down or both edges
    - 16-bit capture input functions
    - 4-deep FIFO on each capture
    • Output Compare (up to two channels):
    - Single or Dual 16-Bit Compare mode
    - 16-Bit Glitchless PWM mode
    • 4-Wire SPI:
    - Framing supports I/O interface to simple codecs
    - 1-deep FIFO Buffer.
    - Supports 8-bit and 16-bit data
    - Supports all serial clock formats and sampling modes
    • I2C™:
    - Supports Full Multi-Master Slave mode
    - 7-bit and 10-bit addressing
    - Bus collision detection and arbitration
    - Integrated signal conditioning
    - Slave address masking
    • UART:
    - Interrupt on address bit detect
    - Interrupt on UART error
    - Wake-up on Start bit from Sleep mode
    - 4-character TX and RX FIFO buffers
    - LIN bus support
    - IrDA® encoding and decoding in hardware
    - High-Speed Baud mode
    - Hardware Flow Control with CTS and RTS
    Interrupt Controller:
    • 5-Cycle Latency
    • Up to 35 Available Interrupt Sources
    • Up to Three External Interrupts
    • Seven Programmable Priority Levels
    • Four Processor Exceptions
    High-Speed PWM Module Features:
    • Up to Four PWM Generators with Four to Eight Outputs
    • Individual Time Base and Duty Cycle for each of the Eight PWM Outputs
    • Dead Time for Rising and Falling Edges
    • Duty Cycle Resolution of 1.04 ns
    • Dead-Time Resolution of 1.04 ns
    • Phase Shift Resolution of 1.04 ns
    • Frequency Resolution of 1.04 ns
    • PWM modes Supported:
    - Standard Edge-Aligned
    - True Independent Output
    - Complementary
    - Center-Aligned
    - Push-Pull
    - Multi-Phase
    - Variable Phase
    - Fixed Off-Time
    - Current Reset
    - Current-Limit
    • Independent Fault/Current-Limit Inputs for 8 PWM Outputs
    • Output Override Control
    • Special Event Trigger
    • PWM Capture Feature
    • Prescaler for Input Clock
    • Dual Trigger from PWM to ADC
    • PWMxL, PWMxH Output Pin Swapping
    • PWM4H, PWM4L Pins Remappable
    • On-the-Fly PWM Frequency, Duty Cycle and Phase Shift Changes
    • Disabling of Individual PWM Generators
    • Leading-Edge Blanking (LEB) Functionality High-Speed Analog Comparator
    • Up to Four Analog Comparators:
    - 20 ns response time
    - 10-bit DAC for each analog comparator
    - DACOUT pin to provide DAC output
    - Programmable output polarity
    - Selectable input source
    - ADC sample and convert capability
    • PWM Module Interface:
    - PWM duty cycle control
    - PWM period control
    - PWM Fault detect High-Speed 10-Bit ADC
    • 10-Bit Resolution
    • Up to 12 Input Channels Grouped into Six Conversion Pairs
    • Two Internal Reference Monitoring Inputs Grouped into a Pair
    • Successive Approximation Register (SAR) Converters for Parallel Conversions of Analog Pairs:
    - 4 Msps for devices with two SARs
    - 2 Msps for devices with one SAR
    • Dedicated Result Buffer for each Analog Channel
    • Independent Trigger Source Section for each Analog Input Conversion Pair
    Power Management:
    • On-Chip 2.5V Voltage Regulator
    • Switch between Clock Sources in Real Time
    • Idle, Sleep, and Doze modes with Fast Wake-up
    CMOS Flash Technology:
    • Low-Power, High-Speed Flash Technology
    • Fully Static Design
    • 3.3V (±10%) Operating Voltage
    • Industrial and Extended Temperature
    • Low-Power Consumption
    System Management:
    • Flexible Clock Options:
    - External, crystal, resonator, internal RC
    - Phase-Locked Loop (PLL) with 120 MHz VCO
    - Primary Crystal Oscillator (OSC) in the range of 3 MHz to 40 MHz
    - Internal Low-Power RC (LPRC) oscillator at a frequency of 32 kHz
    - Internal Fast RC (FRC) oscillator at a frequency of 7.37 MHz
    • Power-on Reset (POR)
    • Brown-out Reset (BOR)
    • Power-up Timer (PWRT)
    • Oscillator Start-up Timer (OST)
    • Watchdog Timer with its RC Oscillator
    • Fail-Safe Clock Monitor (FSCM)
    • Reset by Multiple Sources
    • In-Circuit Serial Programming™ (ICSP™)
    • Reference Oscillator Output
    Application Examples
    • AC-to-DC Converters
    • Automotive HID
    • Battery Chargers
    • DC-to-DC Converters
    • Digital Lighting
    • Induction Cooking
    LED Ballast
    • Renewable Power/Pure Sine Wave Inverters
    • Uninterruptible Power Supply (UPS) Packaging:
    • 18-Pin SOIC
    • 28-Pin SPDIP/SOIC/QFN-S
    • 44-Pin TQFP/QFN


    圖1.dsPIC33FJx6GS系列方框圖

    圖2.dsPIC33FJx6GS系列CPU核方框圖


    圖3.采用dsPIC33FJ16GS504的PFC 和三輸出(12V,5V和3.3V)AC/DC電源框圖

    太陽能(光伏(PV))微逆變器參考設計

    Due to global environmental concerns, photovoltaic (PV) systems (i.e., solar panels) are becoming more common as a renewable energy source.

    The main drawbacks of PV energy are the high cost of manufacturing silicon solar panels and the low conversion efficiency. However, with the latest techniques in manufacturing, PV systems are becoming more efficient, as well as cost effective.

    The conversion of the output voltage from a solar panel into usable DC or AC voltage must be done at its Maximum Power Point, or MPP. MPP is the PV output voltage at which the PV module delivers maximum energy to load.

    Interfacing a solar inverter module with the power grid involves two major tasks. One is to ensure that the solar inverter module is operated at the Maximum Power Point (MPP). The second is to inject a sinusoidal current into the grid. Since the inverter is connected to the grid, the standards given by the utility companies must be obeyed. The EN61000-3-2, IEEE1547 standards, and the U.S. National Electrical Code (NEC) 690, are worth considering. These standards deal with issues like power quality, detection of islanding operation, grounding, and so on.

    These inverters must be able to detect an islanding situation, and take appropriate action in order to prevent bodily harm and damage to equipment connected to the grid. Islanding is the continued operation of the inverter when the grid has been removed intentionally, by accident, or by damage. In other words, if the grid has been removed from the inverter; the inverter should then stop supplying power to the grid or energizing the grid.

    The most common solar technologies today are the monocrystalline and multi-crystalline silicon modules.The MPP voltage range for these PV modules is normally defined in the range from 27V to 45V, at a power generation of approximate 200W, and their open-circuit voltage is below 45V.

    In order to capture the maximum energy from the PV module, solar inverters must guarantee that the PV module is operated at the MPP. This is accomplished by the maximum power point control loop known as the Maximum Power Point Tracker (MPPT). It also involves PV output voltage ripple at the terminals of the PV module being sufficiently small, in order to operate around the MPP without too much variation in PV Current.


    圖3.農村家庭太陽能系統框圖

    圖4.模塊化逆變器(微逆變器)系統框圖

    圖5.太陽能微逆變器系統兩級拓撲圖

    圖6.太陽能微逆變器參考設計框圖

    圖7.交錯式反激轉換器電路

    圖8.連接電網的太陽能微逆變器框圖

    圖9.連接電網的太陽能微逆變器參考設計板外形圖

    This reference design demonstrates the flexibility and power of SMPS dsPIC® Digital Signal Controllers in Grid connected power conversion systems. This reference design works with any photovoltaic (PV) panel of maximum 220 Watts having open circuit voltage between 25V to 55V DC. This reference design ensures maximum power tracking for PV panel voltage between 25V to 45V DC. Two versions of this reference design is available to support 110V and 220V Grid.

    This reference design is implemented using a single dsPIC33F “GS” digital-power DSCs from Microchip that provides the full digital control of the power conversion and system management functions. As shown in this reference design the dsPIC33F ‘GS’ devices enable designers to easily and cost effectively create products using advanced switching techniques that lower switching losses and enable efficiencies as high as 94%. Grid-Connected Solar Micro Inverter Reference Design is royalty free when used in accordance with the licensing agreement.

    太陽能微逆變器參考設計主要特性:

    Peak efficiency of up to 94%
    Beta build peak efficiency of up to 92%
    Output current THD < 5%
    Power factor >0.95
    Maximum power point tracking
    Grid voltage and frequency tracking
    Protection against various current and voltage faults
    System Islanding to detect grid failure
    Full Digital Control
    Specifications:
    Micro Inverter for individual PV Module up to 220W
    Wide PV Panel voltage : 25V to 55V DC
    Maximum Power Point Tracking voltage: 25V to 45V
    Maximum DC short circuit current : 10A
    Grid Frequency range :
    47 – 53 Hz for 220V systems
    57 – 63 Hz for 110V systems
    Grid voltage range :
    90V – 140V for 110V systems
    180V – 264V for 220V systems

    圖10.太陽能微逆變器參考設計電路圖(1)

    圖11.太陽能微逆變器參考設計電路圖(2)

    圖12.太陽能微逆變器參考設計電路圖(3)

    圖13.太陽能微逆變器參考設計電路圖(4)

    圖15.太陽能微逆變器參考設計電路圖(4)

    圖16.太陽能微逆變器參考設計板PCB布局圖(頂層)

    圖17.太陽能微逆變器參考設計板PCB布局圖(底層)

    太陽能微逆變器參考設計材料清單見:
    太陽能微逆變器參考設計材料清單.pdf (106.17 KB)
    詳情請見:
    01338D[1].pdf (1.59 MB)
    本文地址:http://www.portaltwn.com/thread-85227-1-1.html     【打印本頁】

    本站部分文章為轉載或網友發布,目的在于傳遞和分享信息,并不代表本網贊同其觀點和對其真實性負責;文章版權歸原作者及原出處所有,如涉及作品內容、版權和其它問題,我們將根據著作權人的要求,第一時間更正或刪除。
    bijinyi 發表于 2012-1-19 10:47:23
    不錯。謝謝分享 。
    clian 發表于 2019-4-9 14:19:35
    謝謝分享!
    您需要登錄后才可以發表評論 登錄 | 立即注冊

    廠商推薦

    • Microchip視頻專區
    • EtherCAT®和Microchip LAN925x從站控制器介紹培訓教程
    • MPLAB®模擬設計器——在線電源解決方案,加速設計
    • 讓您的模擬設計靈感,化為觸手可及的現實
    • 深度體驗Microchip自動輔助駕駛應用方案——2025巡展開啟報名!
    • 貿澤電子(Mouser)專區

    相關視頻

    關于我們  -  服務條款  -  使用指南  -  站點地圖  -  友情鏈接  -  聯系我們
    電子工程網 © 版權所有   京ICP備16069177號 | 京公網安備11010502021702
    快速回復 返回頂部 返回列表
    精品一区二区三区自拍图片区_国产成人亚洲精品_亚洲Va欧美va国产综合888_久久亚洲国产精品五月天婷