<var id="fnfpo"><source id="fnfpo"></source></var>
<rp id="fnfpo"></rp>

<em id="fnfpo"><object id="fnfpo"><input id="fnfpo"></input></object></em>
<em id="fnfpo"><acronym id="fnfpo"></acronym></em>
  • <th id="fnfpo"><track id="fnfpo"></track></th>
  • <progress id="fnfpo"><track id="fnfpo"></track></progress>
  • <tbody id="fnfpo"><pre id="fnfpo"></pre></tbody>

  • ST STM32L152 32位MCU開發評估方案

    發布時間:2012-1-10 12:03    發布者:1770309616
    關鍵詞: MCU , ST , STM32L152
    ST公司的STM32L152是超低功耗,高數據安全性,高效能的ARM Cortex-M3微控制器系列芯片。低功耗運行模式電流為10.4μA,工作電壓為1.8~3.6 V。在32 MHz頻率下的處理性能達到33 DMOPS(最大值),可提供出色的計算性能和對事件的卓越系統響應,同時可應對動態和靜態功率限制的挑戰。主要應用在低功耗醫療和手提設備,工業控制和用戶接口,PC外設,游戲和GPS設備,有線和無線傳感器,告警系統和公用表.本文介紹了STM32L152主要特性,方框圖,以及STM32L152-EVAL評估板主要特性,電路圖和元件布局圖.

    The ultralow power STM32L15xxx incorporates the connectivity power of the universal serial bus (USB) with the high-performance ARM Cortex™-M3 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 128 Kbytes and RAM up to 16 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer a 12-bit ADC, 2 DACs and 2 ultralow power comparators, six general-purpose 16-bit timers and two basic timers, which can be used as time bases. Moreover, the STM32L15xxx devices contain standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs and a USB. They also include a real-time clock and a set of backup registers that remain powered in Standby mode. Finally, the integrated LCD controller has a built-in LCD voltage generator that allows you to drive up to 8 multiplexed LCDs with contrast independent of the supply voltage.

    The ultralow power STM32L15xxx operates from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option.It is available in the -40 to +85 °C temperature range. A comprehensive set of power-saving modes allows the design of low-power applications.

    This datasheet provides the ordering information and mechanical device characteristics of
    the STM32L151xx and STM32L152xx ultralow power ARM Cortex™-based microcontrollers product line.

    The ultralow power STM32L15xxx family includes devices in 3 different package types: from 48 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.

    These features make the ultralow power STM32L15xxx microcontroller family suitable for a wide range of applications:

    ● Medical and handheld equipment

    ● Application control and user interface

    ● PC peripherals, gaming, GPS and sport equipment

    ● Alarm systems, Wired and wireless sensors, Video intercom

    ● Utility metering

    STM32L152主要特性:

    ■ Operating conditions

    – Operating power supply range: 1.65 V to 3.6 V (without BOR) or 1.8 V to 3.6 V (with
    BOR option)

    – Temperature range: –40 to 85 °C

    ■ Low power features

    – 4 modes: Sleep, Low-power run (9 μA at 32 kHz), Low-power sleep (4.4 μA),

    Stop with RTC (1.45 μA), Stop (570 nA), Standby (300 nA)

    – Dynamic core voltage scaling down to 233 μA/MHz

    Ultralow leakage per I/O: 50 nA

    – Fast wakeup from Stop: 8 μs

    – Three wakeup pins

    ■ Core: ARM 32-bit Cortex™-M3 CPU

    – 32 MHz maximum frequency, 33.3 DMIPS peak (Dhrystone 2.1)

    – Memory protection unit

    ■ Reset and supply management

    – Low power, ultrasafe BOR (brownout reset) with 5 selectable thresholds

    – Ultralow power POR/PDR

    – Programmable voltage detector (PVD)

    ■ Clock management

    – 1 to 24 MHz crystal oscillator

    – 32 kHz oscillator for RTC with calibration

    – Internal 16 MHz factory-trimmed RC

    – Internal 37 kHz low consumption RC

    – Internal multispeed low power RC, 64 kHz to 4 MHz with a consumption down to 1.5
    μA

    – PLL for CPU clock and USB (48 MHz)

    ■ Low power calendar RTC

    – Alarm, periodic wakeup from Stop/Standby

    ■ Memories

    – Up to 128 Kbyte of Flash memory with ECC

    – 4 Kbyte of data EEPROM with ECC

    – Up to 16 Kbyte of RAM

    ■ Up to 83 fast I/Os (73 of which are 5 V-tolerant) all mappable on 16 external interrupt vectors

    ■ Development support

    – Serial wire debug, JTAG and trace

    ■ DMA: 7-channel DMA controller, supporting timers, ADC, SPIs, I2Cs and USARTs

    ■ LCD 8 × 40 or 4 × 44 with step-up converter

    ■ 12-bit ADC up to 1 Msps/24 channels

    – Temperature sensor and internal voltage reference

    – Operates down to 1.8 V

    ■ 2 × 12-bit DACs with output buffers

    ■ 2 ultralow power comparators

    – Window mode and wakeup capability

    ■ 10 timers:

    – 6 × 16-bit general-purpose timers, each with up to 4 IC/OC/PWM channels

    – 2 × 16-bit basic timers

    – 2 × watchdog timers (independent and window)

    ■ Up to 8 communication interfaces

    – Up to 2 × I2C interfaces (SMBus/PMBus)

    – Up to 3 × USARTs (ISO 7816 interface,

    LIN, IrDA capability, modem control)

    Up to 2 × SPIs (16 Mbit/s)

    – USB 2.0 full speed interface CRC calculation unit, 96-bit unique ID

    圖1.STM32L152方框圖

    STM32L152-EVAL評估板

    The STM32L152-EVAL evaluation board is a complete demonstration and development platform for STMicroelectronics’ ARM cortex-M3 core-based STM32L152VBT6 microcontroller supporting two I2C, two SPI and three USART channels, 12-bit ADC, 12-bit DAC, 16 KB internal SRAM and 128 KB Flash, USB FS, LCD controller, touch sensing and JTAG debugging support.

    The full range of hardware features on the board helps you evaluate all peripherals (USB FS, USART, Audio DAC, microphone ADC, dot-matrix LCD, LCD glass, IrDA, light dependant resistor (LDR), MicroSD CardTM and temperature sensor amongst others) and develop your own applications. Extension headers make it possible to easily connect a daughter board or wrapping board for your specific application.

    An ST-LINK/V2 is integrated on the board as embedded in-circuit debugger and programmer for the STM32 MCU.

    圖2. STM32L152-EVAL評估板外形圖

    STM32L152-EVAL評估板主要特性:

    ● Four 5 V power supply options:

    – Power jack

    ST-LINK/V2 USB connector

    User USB connector

    – Daughterboard

    ● Audio speaker and microphone connected to DAC and ADC of STM32L152VBT6

    ● 2 GByte or more SPI interface MicroSD CardTM

    ● I2C compatible serial interface temperature sensor

    ● RS-232 communication

    ● IrDA transceiver

    ● JTAG and trace debug support, ST-LINK/V2 embedded.

    ● 240x320 TFT color LCD connected to SPI interface of STM32L152VBT6

    ● Joystick with 4-direction control and selector

    ● Reset button

    ● Tamper or Key button

    ● 4 color user LEDs and 3 LEDs as MCU power range indicator

    ● MCU consumption measurement circuit

    ● LCD glass 32 x 4 segments connected to LCD controller in STM32L152VBT6

    ● Extension connector for daughterboard or wrapping board

    ● MCU voltage choice of 3.3 V or adjustable from 1.65 V to 3.6 V

    ● USB FS connector

    ● Two touch sensing buttons

    ● Light dependent resistor (LDR)

    ● Potentiometer

    圖3.STM32L152-EVAL評估板方框圖

    圖4.STM32L152-EVAL評估板電路圖:STM32L152-EVAL

    圖5.STM32L152-EVAL評估板電路圖: MCU

    圖6.STM32L152-EVAL評估板電路圖CD glass

    圖7.STM32L152-EVAL評估板電路圖:Audio

    圖8.STM32L152-EVAL評估板電路圖:外設

    圖9.STM32L152-EVAL評估板電路圖:電源

    圖10.STM32L152-EVAL評估板電路圖:擴展連接器

    圖11.STM32L152-EVAL評估板電路圖: LCD和SD卡

    圖12.STM32L152-EVAL評估板電路圖: RS-232和IrDA

    圖13.STM32L152-EVAL評估板電路圖: IDD測試

    圖14.STM32L152-EVAL評估板電路圖:溫度傳感器

    圖15.STM32L152-EVAL評估板電路圖: ST-LINK

    圖16.STM32L152-EVAL評估板電路圖: JTAG和Trace

    圖17.STM32L152-EVAL評估板電路圖:觸摸檢測

    圖18.STM32L152-EVAL評估板元件布局圖
    詳情請見:
    CD00277537[1].pdf (2.02 MB)
    CD00288880[1].pdf (1.24 MB)
    本文地址:http://www.portaltwn.com/thread-85083-1-1.html     【打印本頁】

    本站部分文章為轉載或網友發布,目的在于傳遞和分享信息,并不代表本網贊同其觀點和對其真實性負責;文章版權歸原作者及原出處所有,如涉及作品內容、版權和其它問題,我們將根據著作權人的要求,第一時間更正或刪除。
    xinsijun 發表于 2012-1-11 10:44:18
    謝謝分享
    mmh19891113 發表于 2012-9-3 16:08:55
    謝謝分享謝謝分享謝謝分享謝謝分享謝謝分享謝謝分享
    您需要登錄后才可以發表評論 登錄 | 立即注冊

    廠商推薦

    • Microchip視頻專區
    • 想要避免發生災難,就用MPLAB SiC電源仿真器!
    • 深度體驗Microchip自動輔助駕駛應用方案——2025巡展開啟報名!
    • 利用模擬開發工具生態系統進行安全電路設計
    • Cortex-M4外設 —— TC&TCC結合事件系統&DMA優化任務培訓教程
    • 貿澤電子(Mouser)專區

    相關視頻

    關于我們  -  服務條款  -  使用指南  -  站點地圖  -  友情鏈接  -  聯系我們
    電子工程網 © 版權所有   京ICP備16069177號 | 京公網安備11010502021702
    快速回復 返回頂部 返回列表
    精品一区二区三区自拍图片区_国产成人亚洲精品_亚洲Va欧美va国产综合888_久久亚洲国产精品五月天婷